お世話になります。

今回、Web アプリの開発環境を ubuntu-6.10 で構築する必要が出来ました。ところがハードディスクが認識されません。

/dev を覗いたところ /dev/hdc として起動 CD-ROM が認識されていますが、ハードディスクは見当たりません。

ショップ製の BTO なので診断プログラムがついているのですが、実行したところ問題は見つかりませんでした。

構成情報は以下の通りです。
 購入ショップ:DOS PARA
 マシン: Prime Slim Knight VM S03
 CPU:INTEL CeleronD 331 Tray
 Mother:ASUS P5VD2-VM
 HDD:HITACHI HDS721680PLA380 (SATA2 80GB)

CD からのブートは出来て ubuntu は起動できていて、ネットワークも見れます。

わたしはハードディスクさえ認識させることができればインストールできると思っていますが、どなたかお知恵を拝借できませんか?

ひさしぶりの Linux で困っています。
急を要する件なのでなにとぞ宜しくお願いします。

回答の条件
  • 1人2回まで
  • 登録:2007/03/10 19:33:23
  • 終了:2007/03/12 21:35:50

回答(1件)

id:kurukuru-neko No.1

kurukuru-neko回答回数1844ベストアンサー獲得回数1552007/03/10 20:59:57

ポイント100pt

最近あったはてなの質問と同じ症状です。

http://q.hatena.ne.jp/1172979595

VIAチップセットは同じVIA 8237A

なので同じ対策をしてみては?

転送速度を1.5Gbpsに下げる

http://www.hitachigst.com/tech/techlib.nsf/products/Deskstar_7K1...

id:renpoo

ありがとうございます。

教えていただいた対処を試してみましたが、上手く行きませんでした。

また、こちらも参考にしてみたのですが駄目です。

http://forum.ubuntulinux.jp/viewtopic.php?pid=132

マザーボードの BIOS レヴェルでは HD が認識できているのに JMicron という IDE RAID BIOS で認識に失敗しているように見受けられます。

きょうはもう帰宅しますが、自宅で自分なりに調べてみます。もちろん、皆さんのさらなるアドヴァイス、お待ちしております。

2007/03/10 21:49:15
  • id:kurukuru-neko
    2つあるRAIDコントラーを
    BIOSでは、IDEモードで
    VIA/JMicronを設定する。
    ためしにVIAの方のシリアルSATA
    のコネクターで認識させてみては?

    JMicron JMB36Xはインストール上の
    の問題があるようです。

    http://www-or.amp.i.kyoto-u.ac.jp/members/liang/oss/linux-msi-p965-neo.html

    最新のフォーラムではJMicronの
    マイクロコード更新をすると
    どうにかなるかもとあります?
    http://www.ubuntuforums.org/showthread.php?t=369283&highlight=JMicron

    ASUSのホームページをみると
    LinuxでSATAでドライバーがインストール
    出来ない場合の修正BIOSが提供
    されています。
    2007/03/02 V0801
    http://support.asus.com/download/download.aspx?SLanguage=en-us&model=P5VD2-VM

  • id:renpoo
    連投ありがとうございます。
    明朝出勤したら dmesg を確認しながら、教えていただいた対処法を試して見ます。
  • id:renpoo
    残念ですがまだインストールできません。

    ・ASUS マザーの BIOS はアップデートしました。IDE モードにできているようです。ただし JMicron の画面ではなにもドライヴは認識されません(これでOK?)。

    ・OS の起動オプションに
    > pci=nomsi
    もしくは
    > pci=routeirq
    を加えてみましたがハードディスクは認識されませんでした。


    /bin/dmesg; cat /proc/scsi/scsi の結果を次のコメントでコピーしてみます。
  • id:renpoo
    ubuntu@ubuntu:~$ /bin/dmesg; cat /proc/scsi/scsi
    [17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
    [17179569.184000] BIOS-provided physical RAM map:
    [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [17179569.184000] BIOS-e820: 0000000000100000 - 000000001bee0000 (usable)
    [17179569.184000] BIOS-e820: 000000001bee0000 - 000000001bee3000 (ACPI NVS)
    [17179569.184000] BIOS-e820: 000000001bee3000 - 000000001bef0000 (ACPI data)
    [17179569.184000] BIOS-e820: 000000001bef0000 - 000000001bf00000 (reserved)
    [17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [17179569.184000] 0MB HIGHMEM available.
    [17179569.184000] 446MB LOWMEM available.
    [17179569.184000] found SMP MP-table at 000f5930
    [17179569.184000] On node 0 totalpages: 114400
    [17179569.184000] DMA zone: 4096 pages, LIFO batch:0
    [17179569.184000] Normal zone: 110304 pages, LIFO batch:31
    [17179569.184000] DMI 2.4 present.
    [17179569.184000] ACPI: RSDP (v002 AWARD ) @ 0x000f73c0
    [17179569.184000] ACPI: XSDT (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x1bee30c0
    [17179569.184000] ACPI: FADT (v003 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x1beeab80
    [17179569.184000] ACPI: HPET (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000098) @ 0x1beeadc0
    [17179569.184000] ACPI: MCFG (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x1beeae40
    [17179569.184000] ACPI: MADT (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x1beeacc0
    [17179569.184000] ACPI: DSDT (v001 AWARD ASUSACPI 0x00001000 MSFT 0x03000000) @ 0x00000000
    [17179569.184000] ACPI: PM-Timer IO Port: 0x408
    [17179569.184000] ACPI: Local APIC address 0xfee00000
    [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [17179569.184000] Processor #0 15:4 APIC version 20
    [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    [17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [17179569.184000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [17179569.184000] IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
    [17179569.184000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
    [17179569.184000] IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47
    [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [17179569.184000] ACPI: IRQ0 used by override.
    [17179569.184000] ACPI: IRQ2 used by override.
    [17179569.184000] ACPI: IRQ9 used by override.
    [17179569.184000] Enabling APIC mode: Flat. Using 2 I/O APICs
    [17179569.184000] ACPI: HPET id: 0x11068201 base: 0xfe800000
    [17179569.184000] Using ACPI (MADT) for SMP configuration information
    [17179569.184000] Allocating PCI resources starting at 20000000 (gap: 1bf00000:c4100000)
    [17179569.184000] Built 1 zonelists
    [17179569.184000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash tz=Asia/Tokyo utc=no -- all-generic-ide locale=ja_JP console-setup/layoutcode=jp console-setup/modelcode=jp106
    [17179569.184000] mapped APIC to ffffd000 (fee00000)
    [17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
    [17179569.184000] mapped IOAPIC to ffffb000 (fecc0000)
    [17179569.184000] Enabling fast FPU save and restore... done.
    [17179569.184000] Enabling unmasked SIMD FPU exception support... done.
    [17179569.184000] Initializing CPU#0
    [17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
    [17179569.184000] Console: colour VGA+ 80x25
    [17179569.184000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [17179569.184000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [17179569.184000] Memory: 443752k/457600k available (1910k kernel code, 13376k reserved, 1070k data, 308k init, 0k highmem)
    [17179569.184000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
    [17179569.184000] hpet0: at MMIO 0xfe800000 (virtual 0xdc800000), IRQs 2, 8, 0
    [17179569.184000] hpet0: 3 32-bit timers, 14318180 Hz
    [17179569.184000] Using HPET for base-timer
    [17179569.184000] Using HPET for gettimeofday
    [17179569.184000] Detected 2660.232 MHz processor.
    [17179569.184000] Using hpet for high-res timesource
    [17179569.268000] Calibrating delay using timer specific routine.. 5326.90 BogoMIPS (lpj=10653814)
    [17179569.268000] Security Framework v1.0.0 initialized
    [17179569.268000] SELinux: Disabled at boot.
    [17179569.268000] Mount-cache hash table entries: 512
    [17179569.268000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
    [17179569.268000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
    [17179569.268000] monitor/mwait feature present.
    [17179569.268000] using mwait in idle threads.
    [17179569.268000] CPU: Trace cache: 12K uops, L1 D cache: 16K
    [17179569.268000] CPU: L2 cache: 256K
    [17179569.268000] CPU: Hyper-Threading is disabled
    [17179569.268000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000651d 00000000 00000001
    [17179569.268000] Checking 'hlt' instruction... OK.
    [17179569.284000] SMP alternatives: switching to UP code
    [17179569.284000] Freeing SMP alternatives: 16k freed
    [17179569.284000] checking if image is initramfs... it is
    [17179569.792000] Freeing initrd memory: 5612k freed
    [17179569.792000] ACPI: Core revision 20060707
    [17179569.796000] ACPI: Looking for DSDT ... not found!
    [17179569.800000] ACPI: System reset via FADT Reset Register is supported
    [17179569.800000] machine_reset = acpi_machine_reset
    [17179569.804000] CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 09
    [17179569.804000] Total of 1 processors activated (5326.90 BogoMIPS).
    [17179569.804000] ENABLING IO-APIC IRQs
    [17179569.804000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    [17179569.952000] Brought up 1 CPUs
    [17179569.952000] migration_cost=0
    [17179569.952000] NET: Registered protocol family 16
    [17179569.952000] EISA bus registered
    [17179569.952000] ACPI: bus type pci registered
    [17179569.952000] PCI: Using MMCONFIG
    [17179569.952000] Setting up standard PCI resources
    [17179569.968000] ACPI: Interpreter enabled
    [17179569.968000] ACPI: Using IOAPIC for interrupt routing
    [17179569.968000] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [17179569.968000] PCI: Probing PCI hardware (bus 00)
    [17179569.976000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
    [17179569.976000] Boot video device is 0000:01:00.0
    [17179569.976000] PCI: JMB36x: Enabling dual function on 0000:03:00.0
    [17179569.976000] PCI: Transparent bridge - 0000:00:13.1
    [17179569.976000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [17179570.076000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [17179570.076000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
    [17179570.080000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
    [17179570.080000] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 6 7 10 11 12)
    [17179570.080000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *6 7 10 11 12)
    [17179570.080000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
    [17179570.080000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12)
    [17179570.080000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    [17179570.084000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    [17179570.084000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
    [17179570.088000] ACPI: PCI Root Bridge [PCI1] (0000:80)
    [17179570.088000] PCI: Probing PCI hardware (bus 80)
    [17179570.092000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
    [17179570.096000] Linux Plug and Play Support v0.97 (c) Adam Belay
    [17179570.096000] pnp: PnP ACPI init
    [17179570.104000] pnp: PnP ACPI: found 16 devices
    [17179570.104000] PnPBIOS: Disabled by ACPI PNP
    [17179570.104000] PCI: Using ACPI for IRQ routing
    [17179570.104000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    [17179570.104000] PCI: Cannot allocate resource region 0 of device 0000:03:00.0
    [17179570.104000] PCI: Cannot allocate resource region 1 of device 0000:03:00.0
    [17179570.104000] PCI: Cannot allocate resource region 2 of device 0000:03:00.0
    [17179570.104000] PCI: Cannot allocate resource region 3 of device 0000:03:00.0
    [17179570.104000] pnp: 00:01: ioport range 0x400-0x47f could not be reserved
    [17179570.104000] pnp: 00:01: ioport range 0x500-0x50f has been reserved
    [17179570.104000] PCI: Bridge: 0000:00:01.0
    [17179570.104000] IO window: disabled.
    [17179570.104000] MEM window: dd000000-deffffff
    [17179570.104000] PREFETCH window: d8000000-dbffffff
    [17179570.104000] PCI: Ignore bogus resource 1 [0:0] of 0000:03:00.0
    [17179570.104000] PCI: Ignore bogus resource 3 [0:0] of 0000:03:00.0
    [17179570.104000] PCI: Error while updating region 0000:03:00.0/0 (0000b000 != 00000000)
    [17179570.104000] PCI: Error while updating region 0000:03:00.0/2 (0000b008 != 00000000)
    [17179570.104000] PCI: Bridge: 0000:00:03.0
    [17179570.104000] IO window: b000-cfff
    [17179570.104000] MEM window: dfe00000-dfefffff
    [17179570.104000] PREFETCH window: disabled.
    [17179570.104000] PCI: Bridge: 0000:00:13.1
    [17179570.104000] IO window: a000-afff
    [17179570.104000] MEM window: dfd00000-dfdfffff
    [17179570.104000] PREFETCH window: 20000000-200fffff
    [17179570.104000] PCI: Setting latency timer of device 0000:00:01.0 to 64
    [17179570.104000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 169
    [17179570.104000] PCI: Via IRQ fixup for 0000:00:03.0, from 11 to 9
    [17179570.104000] PCI: Setting latency timer of device 0000:00:03.0 to 64
    [17179570.104000] PCI: Setting latency timer of device 0000:00:13.1 to 64
    [17179570.104000] NET: Registered protocol family 2
    [17179570.144000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    [17179570.144000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [17179570.144000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [17179570.144000] TCP: Hash tables configured (established 16384 bind 8192)
    [17179570.144000] TCP reno registered
    [17179570.144000] audit: initializing netlink socket (disabled)
    [17179570.144000] audit(1173700096.144:1): initialized
    [17179570.144000] VFS: Disk quotas dquot_6.5.1
    [17179570.144000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [17179570.144000] Initializing Cryptographic API
    [17179570.144000] io scheduler noop registered
    [17179570.144000] io scheduler anticipatory registered
    [17179570.144000] io scheduler deadline registered
    [17179570.144000] io scheduler cfq registered (default)
    [17179570.144000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 169
    [17179570.144000] PCI: Setting latency timer of device 0000:00:03.0 to 64
    [17179570.144000] assign_interrupt_mode Found MSI capability
    [17179570.144000] Allocate Port Service[0000:00:03.0:pcie00]
    [17179570.144000] Allocate Port Service[0000:00:03.0:pcie01]
    [17179570.144000] Allocate Port Service[0000:00:03.0:pcie02]
    [17179570.144000] Allocate Port Service[0000:00:03.0:pcie03]
    [17179570.144000] isapnp: Scanning for PnP cards...
    [17179570.500000] isapnp: No Plug & Play device found
    [17179570.560000] Real Time Clock Driver v1.12ac
    [17179570.560000] hpet_resources: 0xfe800000 is busy
    [17179570.560000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    [17179570.560000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [17179570.564000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [17179570.564000] mice: PS/2 mouse device common for all mice
    [17179570.564000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
    [17179570.564000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    [17179570.564000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    [17179570.564000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [17179570.568000] serio: i8042 AUX port at 0x60,0x64 irq 12
    [17179570.568000] serio: i8042 KBD port at 0x60,0x64 irq 1
    [17179570.568000] EISA: Probing bus 0 at eisa.0
    [17179570.568000] EISA: Detected 0 cards.
    [17179570.568000] TCP bic registered
    [17179570.568000] NET: Registered protocol family 1
    [17179570.568000] NET: Registered protocol family 8
    [17179570.568000] NET: Registered protocol family 20
    [17179570.568000] Using IPI No-Shortcut mode
    [17179570.568000] ACPI: (supports S0 S1 S3 S4 S5)
    [17179570.568000] Freeing unused kernel memory: 308k freed
    [17179570.592000] input: AT Translated Set 2 keyboard as /class/input/input0
    [17179571.688000] Capability LSM initialized
    [17179571.728000] ACPI: Fan [FAN] (on)
    [17179571.732000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
    [17179571.732000] ACPI: Getting cpuindex for acpiid 0x1
    [17179571.732000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
    [17179571.732000] ACPI: Getting cpuindex for acpiid 0x2
    [17179571.732000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
    [17179571.732000] ACPI: Getting cpuindex for acpiid 0x3
    [17179571.736000] ACPI: Thermal Zone [THRM] (40 C)
    [17179572.356000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
    [17179572.356000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 0
    [17179572.356000] VP_IDE: chipset revision 7
    [17179572.356000] VP_IDE: not 100% native mode: will probe irqs later
    [17179572.356000] VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
    [17179572.356000] ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:pio, hdb:pio
    [17179572.356000] ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:pio
    [17179572.356000] Probing IDE interface ide0...
    [17179572.932000] Probing IDE interface ide1...
    [17179573.820000] hdc: HL-DT-ST DVDRAM GSA-H42N, ATAPI CD/DVD-ROM drive
    [17179574.164000] ide1 at 0x170-0x177,0x376 on irq 15
    [17179574.180000] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
    [17179574.180000] Uniform CD-ROM driver Revision: 3.20
    [17179574.460000] JMB361: IDE controller at PCI slot 0000:03:00.0
    [17179574.460000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 28 (level, low) -> IRQ 193
    [17179574.460000] JMB361: chipset revision 2
    [17179574.460000] JMB361: 100% native mode on irq 193
    [17179574.460000] JMB361: inconsistent baseregs (BIOS) for port 0, skipping
    [17179574.460000] JMB361: inconsistent baseregs (BIOS) for port 1, skipping
    [17179574.460000] JMB361: neither IDE port enabled (BIOS)
    [17179574.460000] JMB361: IDE controller at PCI slot 0000:03:00.1
    [17179574.460000] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
    [17179574.460000] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 29 (level, low) -> IRQ 201
    [17179574.460000] JMB361: chipset revision 2
    [17179574.460000] JMB361: 100% native mode on irq 201
    [17179574.460000] PCI: Setting latency timer of device 0000:03:00.1 to 64
    [17179574.460000] ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio, hdf:pio
    [17179574.460000] ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:pio, hdh:pio
    [17179574.460000] Probing IDE interface ide2...
    [17179575.032000] Probing IDE interface ide3...
    [17179575.616000] SCSI subsystem initialized
    [17179575.620000] libata version 1.20 loaded.
    [17179575.704000] Probing IDE interface ide0...
    [17179575.792000] usbcore: registered new driver usbfs
    [17179575.796000] usbcore: registered new driver hub
    [17179575.796000] USB Universal Host Controller Interface driver v3.0
    [17179575.800000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 209
    [17179575.800000] PCI: Via IRQ fixup for 0000:00:10.0, from 5 to 1
    [17179575.800000] uhci_hcd 0000:00:10.0: UHCI Host Controller
    [17179575.800000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
    [17179575.800000] uhci_hcd 0000:00:10.0: irq 209, io base 0x0000e000
    [17179575.800000] usb usb1: configuration #1 chosen from 1 choice
    [17179575.800000] hub 1-0:1.0: USB hub found
    [17179575.800000] hub 1-0:1.0: 2 ports detected
    [17179575.908000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 217
    [17179575.908000] PCI: Via IRQ fixup for 0000:00:10.1, from 3 to 9
    [17179575.908000] uhci_hcd 0000:00:10.1: UHCI Host Controller
    [17179575.908000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
    [17179575.908000] uhci_hcd 0000:00:10.1: irq 217, io base 0x0000dc00
    [17179575.908000] usb usb2: configuration #1 chosen from 1 choice
    [17179575.908000] hub 2-0:1.0: USB hub found
    [17179575.908000] hub 2-0:1.0: 2 ports detected
    [17179576.016000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 225
    [17179576.016000] PCI: Via IRQ fixup for 0000:00:10.2, from 6 to 1
    [17179576.016000] uhci_hcd 0000:00:10.2: UHCI Host Controller
    [17179576.016000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
    [17179576.016000] uhci_hcd 0000:00:10.2: irq 225, io base 0x0000d800
    [17179576.016000] usb usb3: configuration #1 chosen from 1 choice
    [17179576.016000] hub 3-0:1.0: USB hub found
    [17179576.016000] hub 3-0:1.0: 2 ports detected
    [17179576.124000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 233
    [17179576.124000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 9
    [17179576.124000] uhci_hcd 0000:00:10.3: UHCI Host Controller
    [17179576.124000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
    [17179576.124000] uhci_hcd 0000:00:10.3: irq 233, io base 0x0000d400
    [17179576.124000] usb usb4: configuration #1 chosen from 1 choice
    [17179576.124000] hub 4-0:1.0: USB hub found
    [17179576.124000] hub 4-0:1.0: 2 ports detected
    [17179576.236000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 225
    [17179576.236000] PCI: Via IRQ fixup for 0000:00:10.4, from 6 to 1
    [17179576.236000] ehci_hcd 0000:00:10.4: EHCI Host Controller
    [17179576.236000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
    [17179576.236000] ehci_hcd 0000:00:10.4: irq 225, io mem 0xdffff000
    [17179576.236000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [17179576.236000] usb usb5: configuration #1 chosen from 1 choice
    [17179576.236000] hub 5-0:1.0: USB hub found
    [17179576.236000] hub 5-0:1.0: 8 ports detected
    [17179576.392000] Probing IDE interface ide2...
    [17179576.960000] Probing IDE interface ide3...
    [17179578.496000] ISO 9660 Extensions: Microsoft Joliet Level 3
    [17179578.580000] ISO 9660 Extensions: RRIP_1991A
    [17179578.632000] Registering unionfs 1.1.4
    [17179578.648000] loop: loaded (max 8 devices)
    [17179578.812000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
    [17179612.636000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [17179612.756000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [17179613.672000] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 20 (level, low) -> IRQ 209
    [17179613.672000] eth0: Identified chip type is 'RTL8169SC/8110SC'.
    [17179613.672000] eth0: r10001.02, the Linux device driver for Realtek Ethernet Controllers at 0xac00, 00:1a:92:15:80:a3, IRQ 209
    [17179613.672000] eth0: Auto-negotiation Enabled.
    [17179615.304000] eth0: 100Mbps Full-duplex operation.
    [17179615.304000] Realtek RTL8169/8110 Family Gigabit Ethernet Network Adapter
    [17179615.304000] Driver version:1.02
    [17179615.304000] Released date:2006/02/23
    [17179615.304000] Link Status:Linked
    [17179615.304000] Link Speed:100Mbps
    [17179615.304000] Duplex mode:Full-Duplex
    [17179615.304000] I/O Base:0xAC00(I/O port)
    [17179615.304000] IRQ:209
    [17179615.872000] input: PC Speaker as /class/input/input1
    [17179616.056000] parport: PnPBIOS parport detected.
    [17179616.056000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [17179616.308000] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 50
    [17179616.308000] PCI: Via IRQ fixup for 0000:80:01.0, from 3 to 2
    [17179616.308000] PCI: Setting latency timer of device 0000:80:01.0 to 64
    [17179616.568000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
    [17179616.600000] ts: Compaq touchscreen protocol output
    [17179618.020000] NET: Registered protocol family 17
    [17179621.308000] NET: Registered protocol family 10
    [17179621.308000] lo: Disabled Privacy Extensions
    [17179621.308000] IPv6 over IPv4 tunneling driver
    [17179625.360000] ACPI: Power Button (FF) [PWRF]
    [17179625.360000] ACPI: Power Button (CM) [PWRB]
    [17179625.360000] ACPI: Sleep Button (CM) [SLPB]
    [17179625.740000] ibm_acpi: ec object not found
    [17179625.764000] pcc_acpi: loading...
    [17179627.732000] lp0: using parport0 (interrupt-driven).
    [17179627.748000] ppdev: user-space parallel port driver
    [17179630.324000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [17179630.324000] apm: overridden by ACPI.
    [17179631.920000] eth0: no IPv6 routers present
    [17179643.888000] Bluetooth: Core ver 2.8
    [17179643.888000] NET: Registered protocol family 31
    [17179643.888000] Bluetooth: HCI device and connection manager initialized
    [17179643.888000] Bluetooth: HCI socket layer initialized
    [17179644.048000] Bluetooth: L2CAP ver 2.8
    [17179644.048000] Bluetooth: L2CAP socket layer initialized
    [17179644.168000] Bluetooth: RFCOMM socket layer initialized
    [17179644.168000] Bluetooth: RFCOMM TTY layer initialized
    [17179644.168000] Bluetooth: RFCOMM ver 1.7
    [17179645.152000] hda-intel: Invalid position buffer, using LPIB read method instead.
    Attached devices:
    ubuntu@ubuntu:~$
  • id:renpoo
    それと筐体を開けて確認しましたが、ハードディスクは ASUS のほうの SATA に繋がっています。

    以上、宜しくお願いします。
  • id:renpoo
    > http://forum.ubuntulinux.jp/viewtopic.php?id=140

    ここを見てもしや、と思い、Gparted-liveCD-0.3.3-5.isoを焼いて、起動してみました。そうすると SATA のハードディスクが認識されてパーティションも切ることができました。

    これで行けるかな?と ubuntu の CD から再起動してみましたが、また認識できません。ubuntu のインストール CD の Gparted をリプレースしなければならないのでしょうか?

    う~む……。



  • id:kurukuru-neko

    [17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)

    [17179572.356000] VP_IDE: chipset revision 7
    [17179572.356000] VP_IDE: not 100% native mode: will probe irqs later
    [17179572.356000] VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1

    [17179572.356000] ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:pio, hdb:pio
    [17179572.356000] ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:pio
    [17179572.356000] Probing IDE interface ide0...
    [17179572.932000] Probing IDE interface ide1...

    [17179574.460000] JMB361: chipset revision 2

    [17179574.460000] ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio, hdf:pio
    [17179574.460000] ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:pio, hdh:pio
    [17179574.460000] Probing IDE interface ide2...
    [17179575.032000] Probing IDE interface ide3...

    [17179645.152000] hda-intel: Invalid position buffer, using LPIB read method instead.

    1.5Gbpsへの変更
    http://www.hitachigst.com/hdd/support/qcheck.htm#a21

    8237A は、Kernel 2.6.18からサポートのようです。
    http://forums.viaarena.com/messageview.aspx?catid=28&threadid=73646&enterthread=y
    http://www.linuxforen.de/forums/showthread.php?t=220433

    ログからみると JMB361のハードのドライバーは
    正常動作しているようなので。
    コネクターを差し替えてみてはどうですか?
  • id:kurukuru-neko

    使う予定がないシリアル・パラレル・
    bluetooth等は無効にしておいて
    方がよい。

  • id:kurukuru-neko
    2.6.17.14から適用のようなので
    まだ適用されていないと思います。

    Linux version 2.6.17.14 VIA
    http://kerneltrap.org/node/7060
  • id:renpoo
    度々の御助言ありがとうございます。

    JMicron のほうに差し替えて HDD は BIOS レヴェルで認識できましたが、やはりカーネル・レヴェルでは駄目なようです。

    そこで一時避難用に別の IDE HDD を繋げてインストールを試みています。一旦、稼動する HDD に ubuntu を載せ、カーネルをアップデートした上で SATA HDD にインストールできないか試すためです。

    後ほど、結果を報告します。
  • id:renpoo
    とりあえず一時的に IDE にインストールすることが出来ました。

    これでカーネルをアップデートできれば活路が開けるかと思いましたが、update-manager が開発版(7.04)をインストールしようとファイルをダウンロードするとき(「アップグレードの準備」)にエラーを起こして、アップデートできません。

    とりあえず暫定の状態で急場をしのいでアップグレードについては折を見て行うようにしたいと思います。

    kurukuru-neko さん、いろいろとありがとうございます。
    のちほどポイントを差し上げます。

この質問への反応(ブックマークコメント)

「あの人に答えてほしい」「この質問はあの人が答えられそう」というときに、回答リクエストを送ってみてましょう。

これ以上回答リクエストを送信することはできません。制限について

絞り込み :
はてなココの「ともだち」を表示します。
回答リクエストを送信したユーザーはいません